UbenPlus| Watch Free Educational and Infotainment Videos

How To Operate Arduino CNC Machine

Fri, 14 Apr 2023 19:57:31 +0000

Hello guys, In this tutorial I'll show you to operate the Arduino CNC Drawing machine. Sorry for late upload. So let's get started.

Code and Circuit diagram link: (https://www.instructables.com/....id/DIY-Arduino-Drawi
Arduino IDE: (https://www.arduino.cc/en/Main/Software)
Processing: (https://processing.org/download/)

------------------------------------------------------------
Thanks for watching this Video. If you like this video then hit the LIKE button, share it and also make sure you don't forget to subscribe my channel for more upcoming awesome projects.

If you have any question related to this project then let me know in this comment section below :)

Here my social sites:
Facebook: https://www.facebook.com/surajit.maju...
Instructables: http://www.instructables.com/member/S...
Twitter: https://twitter.com/DIYBuilder1
Instagram: https://www.instagram.com/surajit_majumdar/
---------------------------------------------------------------

How To Make A Heavy Bass Bluetooth Speaker With Powerbank At Home

Fri, 14 Apr 2023 19:57:31 +0000

Hey Guys, In this tutorial I'm going to show you how to make a Bluetooth speaker, which has an inbuilt power bank. So you can also use this speaker to charge your mobile and other USB support devices. So let's get started :)

Parts List:
1) 3W speaker(2x) (alternative https://www.banggood.com/40mm-....4Ohm-5W-Full-Range-A
2) Passive Radiator.(https://www.banggood.com/2Pcs-....60x90MM-Low-frequenc
3) PAM 8403 Amplifier Module.(https://www.banggood.com/5pcs-....PAM8403-Miniature-Di
4) Bluetooth Module.(https://www.amazon.in/Generic-....Bluetooth-Receiver-W
5) Micro USB battery Charging Module. (https://www.banggood.com/USB-L....ithium-Battery-Charg
6) 3V to 5V 1A Boost Converter. (https://www.banggood.com/3V-To....-5V-1A-USB-Charger-D
7) 18650 Li-on Battery(2x) ( From Old Power Bank)
8) On/OFF Switch. (Local Store)
9) 4mm Acrylic Sheet. (Local Store)

Here's the link for the circuit diagram and more details
https://www.instructables.com/....id/DIY-Bluetooth-Spe
--------------------------------------------------------
Thanks for watching this Video. If you like this video then hit the LIKE button, share it and also make sure you don't forget to subscribe my channel for more upcoming awesome projects.

If you have any question related to this project then let me know in this comment section below :)

Here my social sites:
Facebook: https://www.facebook.com/surajit.majumder.165
Instructables: http://www.instructables.com/m....ember/Surajit%20Maju
twitter:https://twitter.com/DIYBuilder1
----------------------------------------------------

How To Make A DIY Rechargeable Electric Pencil Sharpener At Home

Fri, 14 Apr 2023 19:57:31 +0000

Hello Guys, In this tutorial, I am going to show you how to make a DIY electric pencil sharpener at home using the only few components. So let's get started.

Here's the parts list:
1) 3mm acrylic sheet( red & black)
2) Micro Servo motor.
3) 1200mAh Li-ion Battery.
4) Battery Charging Module.
5) Pencil Sharpener.
6) Push Button.
--------------------------------------------------------
Thanks for watching this Video. If you like this video then hit the LIKE button, share it and also make sure you don't forget to subscribe my channel for more upcoming awesome projects.

If you have any question related to this project then let me know in this comment section below :)

Here my social sites:
Facebook: https://www.facebook.com/surajit.maju...
Instructables: http://www.instructables.com/member/S...
--------------------------------------------------------------
Background Music:
Indiana by Declan DP https://soundcloud.com/declandp
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/BuHIfIyT6MU
------------------------------------------------------------

How To Make Amazing Arduino 2in1 Robot | Arduino 2WD ROBOT |

Fri, 14 Apr 2023 19:57:31 +0000

Hey Guys, In this tutorial I am going to show you how to make a DIY Arduino 2in1 Robot.

It's a simple 2WD line follower robot and also it requires very few parts to make. it can work on both black and white colors track. By sliding the track select switch you can change its mode from black to white or white to black. you can make this robot for your science project. So let's make it 😊

Show your love ❤️ https://bit.ly/2WlyA8Y
-------------------------------------
💻Code: https://bit.ly/2I5ZS2a
📌Circuit Diagram: https://bit.ly/3lz2x1X

😊Contact me
Instagram: https://www.instagram.com/diy.builder/
-------------------------------------

Parts List :
1) Arduino Uno : https://amzn.to/33C8pRP
2) L293D Motor Driver : https://amzn.to/33zkUxD
3) Rubber Wheel (2x) : https://amzn.to/33zkUxD
4) TT Gear Motor(2x): https://amzn.to/3qlTJQI
5) IR Line Tracking Sensor(2x): https://bit.ly/3qesFmp
6) 18650 Li-ion Battery - https://bit.ly/3fYn3Ih
7) 18650 Battery Holder - https://bit.ly/2JApmFl
8) DC Slide Switch: (Offline Store)
9) Acrylic Sheet: https://amzn.to/36wpwqd
10) Jumper Wire: https://bit.ly/2I0L3Ob

Tools Required:
1) Soldering iron :
2) Glue Gun:
3) Acrylic Cutter:
4) Drill Machine :
5) Mini Handsaw:
---------------------------------------------------
More Arduino Related Projects:
More Arduino robot projects:
1) Arduino Human Following Robot - https://youtu.be/yAV5aZ0unag
2) Arduino All-in-one Robot - https://youtu.be/I2RNq90l2nc
3) Arduino Metal Detector Robot - https://youtu.be/oqpNw4kf7Jw
4) Arduino Obstacle Avoidance Robot - https://youtu.be/1n_KjpMfVT0
5) Arduino Voice Control Robot - https://youtu.be/j7yltf_LtKQ
6) Arduino Gesture Control Robot - https://youtu.be/svJwmjplm4c

--------------------------------------------------
🎵 Background Music:
Money (feat. Celeste Collins) by Pold https://soundcloud.com/pold-music
Creative Commons — Attribution-ShareAlike 3.0 Unported — CC BY-SA 3.0
Free Download / Stream: http://bit.ly/2Prkqnx
Music promoted by Audio Library https://youtu.be/t4cifce334k

Track: THNK U — Jay Someday [Audio Library Release]
Music provided by Audio Library Plus
Watch: https://youtu.be/qRf4Qx62fcY
Free Download / Stream: https://alplus.io/thnk-u

good morning by Amine Maxwell https://soundcloud.com/aminemaxwell
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: http://bit.ly/2vpruoY
Music promoted by Audio Library https://youtu.be/SQWFdnbzlgI
-------------------------------------------
#Arduino #ArduinoRobot #ArduinoProject

Convert Your $1 Ordinary Led Bulb Into A Smartphone Controlled Smart Led Bulb

Fri, 14 Apr 2023 19:57:31 +0000

$2 for 10 PCB & Free Shipping on First Order: https://jlcpcb.com

Hello Guys, in this tutorial, I'm going to show you how you can convert your ordinary Led bulb into a smartphone-controlled colour changing smart led bulb. So let's get started.

Here is the link for Circuit Diagram, Gerber File and Source Code:
https://www.instructables.com/....id/DIY-RGB-Smart-Bul

Here's the parts list:
1) Arduino Nano.
2) HC-05 Bluetooth Module.
3) 5mm RGB Led(6ps)(common cathode)
4) 100 Ohms Resistor(18ps)
5) 4.7k Resistor(3ps)
6) 2N2222 NPN Transistor(3ps)
7) Male & Female Header Pin.
8) 5v 1A Mobile Charger Board.
9) Custom PCB.
10) Old Or Broken Led Bulb.

[Flyrobo.in]

Arduino Nano. : https://www.flyrobo.in/arduino...._nano_r3_board_with_

HC-05 Bluetooth Module. : https://www.flyrobo.in/hc_5_bl....uetooth_wireless_uar

5mm RGB Led : https://www.flyrobo.in/three_c....olour_rgb_smd_led_mo

100 Ohms Resistor : https://www.flyrobo.in/100-ohm....-resistor?tracking=F

4.7k Resistor : https://www.flyrobo.in/4k7-4.7....k-ohm-resistor-other

2N2222 NPN Transistor : https://www.flyrobo.in/2n2222-....switching-transistor

Male Header Pin. : https://www.flyrobo.in/40-pin-....male-header-connecto

Female Header Pin. : https://www.flyrobo.in/2mm-pit....ch-female-burg-strip

5v 1A Mobile Charger Board. : https://www.flyrobo.in/5v-1a-d....c-power-supply-adapt

Custom PCB. : https://www.flyrobo.in/9_x_15c....m_pcb_prototyping_pr

Old Or Broken Led Bulb. :
--------------------------------------------------
Thanks for watching this Video. If you like this video then hit the LIKE button, share it and also make sure you don't forget to subscribe my channel for more upcoming awesome projects.

If you have any question related to this project then let me know in this comment section below :)

Here my social sites:
Facebook: https://www.facebook.com/surajit.majumder.165
Instructables: http://www.instructables.com/m....ember/Surajit%20Maju
twitter:https://twitter.com/DIYBuilder1
----------------------------------------------------

How To Make DIY Arduino RGB Led Strip Controller

Fri, 14 Apr 2023 19:57:31 +0000

JLCPCB Prototype for $2(Any Color): https://jlcpcb.com
Hello Guys, In this tutorial i am going to show you how to make DIY Arduino RGB Led strip controller, So let's get started :)

Find electronic components on https://www.utsource.net/
Utsource is a proffesional elelctronice supplier with more than 2 million product, lower price with free shipping.

Here's the parts list:
1) Arduino Nano -
2) HC-05 Bluetooth Module -
3) IRFZ44N Mosfet -
4) 1K Resistor -
5) Female Header -
6) Male Header -
7) Screw Terminal -

-------------------------------------------------
Gerber File - https://bit.ly/3jFZaGO
Circuit Schematic - https://bit.ly/2V9zl8y
Code - https://bit.ly/3hAaylE

Thanks For Watching
✅LIKE ✅SHARE ✅ COMMENTS✅ SUBSCRIBE
----------------------------------------------------
🎧 Background Music
Drops In Mind by Le Gang https://soundcloud.com/thisislegang
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/nRIG-9W2KNA

Roads 2 (feat. LiQWYD) by Le Gang https://soundcloud.com/thisislegang
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/dq0SugAIpkc

----------------------------------------------------
#DIYRGBLedStripController #LedStripController #RGBLedStrip

Unboxing and Testing Anet ET4 3D Printer

Fri, 14 Apr 2023 19:57:31 +0000

Hello guys, in this video I am doing an unboxing of Anet ET4 printer. So let's get started :)

Subscribe It's Free https://bit.ly/2WlyA8Y

Printer Kit: https://bit.ly/37BSKlA

Thanks For Watching
✅LIKE ✅SHARE ✅ COMMENTS✅ SUBSCRIBE

-------------------------------------------------------
Here my social sites:
Facebook: https://www.facebook.com/surajit.majumder.165
Instructables: https://www.instructables.com/....member/Surajit%20Maj
twitter:https://twitter.com/DIYBuilder1
Instagram: https://www.instagram.com/diy.builder/

--------------------------------------------------------
🎧 Background Music
A Magical Journey Through Space by Leonell Cassio
https://soundcloud.com/leonellcassio
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: https://bit.ly/a-magical-journey-thro...
Music promoted by Audio Library https://youtu.be/DRwYhxVNwzU

Track: Perspective — IVAAVI [Audio Library Release]
Music provided by Audio Library Plus
Watch: https://youtu.be/MTNPhR1xlmc
Free Download / Stream: https://alplus.io/Perspective

Childhood by Mike Chino https://soundcloud.com/mike-chino
Creative Commons — Attribution-ShareAlike 3.0 Unported — CC BY-SA 3.0
Free Download / Stream: https://bit.ly/childhood_
Music promoted by Audio Library https://youtu.be/RWaPL0km2fs
-----------------------------------------------------------
#3DPrinter #AnetET4

How To Make A DIY Arduino LED Cube

Fri, 14 Apr 2023 19:57:31 +0000

Hello guys, In this tutorial, I'm going to show you how to make a DIY Arduino led cube at home, so let's get started :)

Parts List:
1) Arduino Nano - https://bit.ly/2AhPIEJ
2) Blue Led (64x) - Buy From Offline Store.
3) 220R Resistor (16x) - https://bit.ly/2PHZHZt
4) 10K Resistor (4x) - https://bit.ly/2PHZHZt
5) 2N2222 NPN Transistor (4x) - https://bit.ly/2CSWKCC
6) PCB Board - https://bit.ly/2CrvMkl
7) Female Header - https://bit.ly/2J7dWnU
8) Thick Copper Wire - Buy From Hardware Store.
9) 3mm Acrylic Sheet - Buy From Hardware Store.
10) Nylon Spacer and Screw - https://bit.ly/2AidQaw

[Flyrobo.in]
Arduino Nano : https://www.flyrobo.in/arduino...._nano_r3_board_with_

Blue Led : https://www.flyrobo.in/blue-le....d-5mm-pack-of-100-li

220R Resistor : https://www.flyrobo.in/220-ohm....-resistor-other?trac

10K Resistor : https://www.flyrobo.in/10k-ohm....-resistor-other?trac

2N2222 NPN Transistor : https://www.flyrobo.in/2n2222-....switching-transistor

PCB Board : https://www.flyrobo.in/9_x_15c....m_pcb_prototyping_pr

Female Header : https://www.flyrobo.in/2mm-pit....ch-female-burg-strip

Thick Copper Wire :

3mm Acrylic Sheet :

Nylon Spacer and Screw
-----------------------------------------------
Here's the code link: https://bit.ly/2JT6u0h
Here's the circuit diagram link https://easyeda.com/SurajitM/DIY-Arduino-Led-Cube
--------------------------------------------------
Thanks for watching this Video. If you like this video then hit the LIKE button, share it and also make sure you don't forget to subscribe my channel for more upcoming awesome projects.

If you have any question related to this project then let me know in this comment section below :)

Here my social sites:
Facebook: https://www.facebook.com/surajit.maju...
Instructables: http://www.instructables.com/member/S...
twitter:https://twitter.com/DIYBuilder1
-------------------------------------------------------------
#ArduinoLedCube #ArduinoProjects #LedProjects

How To Make A Powerful And Portable Bluetooth Speaker

Fri, 14 Apr 2023 19:57:31 +0000

Hello Guys, In this tutorial I'm going to show you how to make a powerful and portable Bluetooth speaker. I've got a great response at my previous Bluetooth speaker's tutorial so I'm very thankful to all of you. Actually, I'm making this bt speaker cause my previous bt speaker was not very good in terms of sound quality and loudness.

Meet this new DIY Bluetooth speaker, which features good sound quality, impressive bass and ultra portable size.

Here is the parts list:
1) 3W Speaker (2x)
2) PAM8403 Amplifier Module.
3) Bluetooth Module
4) 2700mAh Lipo Battery
5) Battery Charging Module With Protection Board
6) Power Switch
7) 4mm Acrylic sheet (Black And White)

Here is the link of circuit diagram and more details :
(https://www.instructables.com/....id/DIY-Portable-Blue

---------------------------------------------------
Thanks for watching this Video. If you like this video then hit the LIKE button, share it and also make sure you don't forget to subscribe my channel for more upcoming awesome projects.

If you have any question related to this project then let me know in this comment section below :)

Here my social sites:
Facebook: https://www.facebook.com/surajit.majumder.165
Instructables: http://www.instructables.com/m....ember/Surajit%20Maju

-----------------------------------------------------
Track: Michael White - Angel’s Anthem [NCS Release]
Music provided by NoCopyrightSounds.
Watch: https://youtu.be/gZzVH2Ro66A
Free Download / Stream: http://ncs.io/AngelsAnthemYO
------------------------------------------------------------------------
Background Music:
Track: Alan Walker - Spectre [NCS Release]
Music provided by NoCopyrightSounds
Watch:https://www.youtube.com/watch?v=AOeY-nDp7hI
------------------------------------------------------------

Artillery Sidewinder X1 3D Printer Unboxing And Review (Latest Version)

Fri, 14 Apr 2023 19:57:31 +0000

Hi Everyone, Today I'm doing the unboxing and review of the Artillery Sidewinder X1 3D Printer. This is one of the best 3d printer you can buy at $400 and this printer offers an impressive set of features like Solid and sleek design frame, 300x300x400mm larger volume, Drive Drive titan extruder, rapid fast heating bed, super silent operation, print resume, power failure recovery, colorful touch screen, USB drive support. etc
------------------------------------------
Show your love ❤️ https://bit.ly/2WlyA8Y
Purchase Link: https://www.aliexpress.com/item/32967550004.html
Artillery 3d official website: https://www.artillery3d.com/

😊Contact me
Instagram: https://www.instagram.com/diy.builder/
-------------------------------------------

GENERAL SPECIFICATIONS
Manufacturer: Artillery
Technology: FDM
Year: 2019
Assembly: Pre-assembled
Mechanical arrangement: Cartesian-XY-Head

3D PRINTING PROPERTIES
Outer dimensions: 550 x 405 x 640 mm
Weight: 14Kg
Build volume: 300 x 300 x 400 mm (11.8 x 11.8 x 15.75 inches)
Layer height: 0.05 mm
Extruder Type: Direct drive (Titan Extruder)
Nozzle type: Volcano
Nozzle size: 0.4 mm
Max. extruder temperature: 270°C
Max. heated bed temperature: 130 °C
Frame: Aluminum
Print chamber: Open
Bed leveling: Manual
Print bed: Rapid-heating AC bed
Display: Touchscreen
Connectivity: SD, USB cable
Built-in camera for monitoring: No
Print recovery: Yes
Filament sensor: Yes

MATERIALS
Filament diameter: 1.75 mm
Third-party filaments: Yes
Materials: PLA, ABS, flexible PLA, TPU, wood, PVA, HIPS
----------------------------------------------
#ArtillerySidewinderX1 #3Dprinter

How To Make Arduino Text Scrolling Display

Fri, 14 Apr 2023 19:57:31 +0000

Hello Guys, In this tutorial, I am going to show you how you make Arduino text scrolling display So let's get started :)

Parts list:
1) Arduino Nano - https://bit.ly/2RdpIo4
2) Dot-matrix Display - https://bit.ly/2GjgkJ4
3) Female to Male Header Pin - https://bit.ly/2su6mfM

[Flyrobo]
Arduino Nano : https://www.flyrobo.in/arduino...._nano_r3_board_with_

Dot-matrix Display :

Female to Male Header Pin : https://www.flyrobo.in/10cm_ma....le_to_female_jumper_
-----------------------------------------------------------
Thanks for watching this Video. If you like this video then hit the LIKE button, share it and also make sure you don't forget to subscribe my channel for more upcoming awesome projects.

If you have any question related to this project then let me know in this comment section below :)

Here my social sites:
Facebook: https://www.facebook.com/surajit.maju...
Instructables: http://www.instructables.com/member/S...
twitter:https://twitter.com/DIYBuilder1
-------------------------------------------------------------
Background Music:
Bongo by KV https://soundcloud.com/kvmusicprod
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/pDiQewAmf9Y
----------------------------------------------------
#DIY #ArduinoProject #TextScrollingDisplay

X-light All-In-One Light Kit

Fri, 14 Apr 2023 19:57:31 +0000

Hey guys, In this video, I'm doing the unboxing and review of the X-light, Which is a light kit from Makeblock. So let's get started :)

Buy on Makeblock : https://bit.ly/30lbBm9
Buy on Amazon: https://www.amazon.com/dp/B09H9XYDK1?maas=maas_adg_ED7D0BA3A5EA5DA08A4678FF17C688DD_afap_abs&ref_=aa_maas
--------------------------------------------------------------
Show your love ❤️ https://bit.ly/2WlyA8Y

😊Follow Me
Instagram: https://www.instagram.com/diy.builder/
------------------------------------------------------------------
------------------------------------------------------------------
GEAR I USE
Canon EOS 200D II With 18-55mm kit Lens: https://amzn.to/3a5b0r4
Tripod: https://amzn.to/3cYWIdr
Lights: https://amzn.to/3pbqr5k
Editing Software: Adobe Premiere Pro

🎵 Audio by @Epidemic Sound
You can find all the music I use here: https://www.epidemicsound.com/referral/fmubpx/
---------------------------------------------
#LightKit #RGBLight #X-light

mBot Mega Advanced All-In-One Robot Kit For Students | MakeBlock Robot Kit | Arduino Robot Kit

Fri, 14 Apr 2023 19:57:31 +0000

Hi Guys, In this video, I'm doing the unboxing of mBot Mega from MakeBlock. mBot Mega an advanced Arduino mechanical robot kit, equiped with 4WD mecanum wheels, 7 sensors, 8RGB lights, 4DC motors, 1 Bluetooth module, that is ideal for Arduino beginers and professionals to learn robotics, electronics and programming.

Show your love ❤️ https://bit.ly/2WlyA8Y
-----------------------------------------------------------
Purchase Link : https://bit.ly/34UVACq (Use Code mBotMega10 to save 10%)

😊Follow Me
Instagram: https://www.instagram.com/diy.builder/
------------------------------------------------------------
Features:
1) Ideal for Arduino beginners or professionals to learn robotics, electronics, and programming. Perfectly matched with Rasberry Pi (not included).

2) Equipped with 4WD mecanum wheels and Makeblock app, your movement options are limitless and in any direction.

3)Based on Mega AT2560, it has a strong motor-driving ability that can connect to up to 10 servos, 8 DC motors, or 4 stepper motors at the same time.

4)Robot supports Arduino IDE and Scratch. Detailed construction guide and 20+ online projects

5)3 preset modes for an easy start after assembly. Perfect learning & educational toy gift for teens and adults.
----------------------------------------------------------

GEAR I USE
Canon EOS 200D II With 18-55mm kit Lens: https://amzn.to/3a5b0r4
Tripod: https://amzn.to/3cYWIdr
Lights: https://amzn.to/3pbqr5k
Editing Software: Adobe Premiere Pro

🎵 Audio by @Epidemic Sound
You can find all the music I use here: https://www.epidemicsound.com/referral/fmubpx/
---------------------------------------------

#mBotMega #ArduinoRobot #RobotKit

How To Make A Simple DIY Mobile Speaker At Home (From Scratch)

Fri, 14 Apr 2023 19:57:31 +0000

Hello Guys, In this tutorial, I am going to show you how to make a simple DIY mobile speaker at home from scratch. This is a very cheap DIY mobile speaker and it's very easy to make. Also, you don't need any professional tools to make this awesome speaker. we only need following few component below for this awesome speaker. So let's get started :)

Parts List:
1)Pan Masala Container.
2) PAM 8403 Amplifier Module.
3) 3W Speaker.
4) Old Mobile Battery.
5) 3.5mm AUX Port.
6) DC Switch.
7) Battery Charging Module.

Thanks for watching this Video. If you like this video then hit the LIKE button, share it and also make sure you don't forget to subscribe my channel for more upcoming awesome projects.

If you have any question related to this project then let me know in this comment section below :)

----------------------------------------------------------------
Background Music:
Crimson Fly - Huma-Huma: https://youtu.be/qpxhgby-ONI

Music Track:
Different Heaven - Nekozilla[NCS Release]
Music provided by NoCopyrightSounds.
Watch: https://www.youtube.com/watch?v=6FNHe3kf8_s
Free Download / Stream: https://www.youtube.com/watch?v=6FNHe3kf8_s
----------------------------------------------------------

How To Make Arduino Line Follower Robot Using L298N Motor Driver

Fri, 14 Apr 2023 19:57:31 +0000

JLCPCB Prototype for $2(Any Color): https://jlcpcb.com
Hello Guys, In this tutorial I am going to show you how to make Arduino Line Follower car using L298N Motor driver, So let's get started :)

Subscribe It's Free https://bit.ly/2WlyA8Y

Parts List :
(Banggood.com)
1) Arduino Nano - https://bit.ly/2RdpIo4
2) L298N Motor Driver - https://bit.ly/2LTqEMh
3) IR Sensor - http://bit.ly/2k70nNi
4) Wheels - https://bit.ly/2XIaDOQ
5) TT Gear Motor - https://bit.ly/2XZFLZv
6) 18650 Li-ion Battery - (Local Store, Old powerbank or laptop battery)
7) Battery Holder - https://bit.ly/2sulLwu
8) Male And Female Jumper - http://bit.ly/2k8pPC3
10) 5mm Acrylic Sheet(14x9cm) - (Local Store)

[Flyrobo.in] (For India)
1) Arduino Nano - https://bit.ly/2kzPi7S
2) L298N Motor Driver - https://bit.ly/2ksMcSU
3) IR Sensor -https://bit.ly/2mv8Uuo
4) Wheels - https://bit.ly/2kxPeFF
5) TT Gear Motor - https://bit.ly/2m4fMid
6) 18650 Li-ion Battery - (Local Store, Old powerbank or laptop battery)
7) Battery Holder - https://bit.ly/2sulLwu
8) Male And Female Jumper -https://bit.ly/2mu0aVo
10) 5mm Acrylic Sheet(14x9cm) - (Local Store)

(Amazon.in)
1) Arduino Nano - https://amzn.to/35c5fDv
2) L298N Motor Driver - https://amzn.to/30WoAW2
3) TT Gear Motor and Wheels Full Set - https://amzn.to/2IuY6o6
4) Rubber Wheels(4x) - https://amzn.to/2Iv1krI
5) TT Gear Motor(4x) -https://amzn.to/2oeovjm
6) IR Sensor(2x) -https://amzn.to/31YTmPw
7) Ultrasonic Sensor - https://amzn.to/35dFoes
8) 18650 Li-ion Battery(2x) -
9) Battery Holder - https://amzn.to/2Iv1krI
9) 5mm Acrylic Sheet - (Local Store)

-------------------------------------------------------
Gerber File - https://bit.ly/2kCkS4P
Circuit Diagram - https://bit.ly/2kBOQ8S
Code - http://bit.ly/2kDXXpA
--------------------------------------------------------
More Arduino Car Related Projects
1) Arduino Voice Controlled Car - https://bit.ly/2WUdsuR
2) Arduino Bluetooth Controlled Car - https://bit.ly/2WpYPuX
3) Arduino Line Follower Car - https://bit.ly/2ZimqPV
4) NodeMCU WIFI Controlled Car - https://bit.ly/2XA941d

Thanks For Watching
✅LIKE ✅SHARE ✅ COMMENTS✅ SUBSCRIBE
-------------------------------------------------------
Here my social sites:
Instagram: https://www.instagram.com/diy.builder/
Facebook: https://www.facebook.com/surajit.majumder.165
Instructables: https://www.instructables.com/....member/Surajit%20Maj
twitter:https://twitter.com/DIYBuilder1
------------------------------------------------------
🎧 Background Music
Track: Perspective — IVAAVI [Audio Library Release]
Music provided by Audio Library Plus
Watch: https://youtu.be/MTNPhR1xlmc
Free Download / Stream: https://alplus.io/Perspective

Roads 2 (feat. LiQWYD) by Le Gang https://soundcloud.com/thisislegang
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: http://bit.ly/2DcLIpk
Music promoted by Audio Library https://youtu.be/dq0SugAIpkc
-----------------------------------------------------------------
#ArduinoProjects #ArduinoRobot #LineFollowerCar

How To Make DIY Music Reactive RGB LED Strip (WS2812B)

Fri, 14 Apr 2023 19:57:31 +0000

Hello guys, in this tutorial I am going to show you how to make DIY music reactive RGB Led Strip, So let's get started :)

Find electronic components on https://www.utsource.net/
Utsource is a proffesional elelctronice supplier with more than 2 million product, lower price with free shipping.

▽Here's the parts list:
1) WS2812B Addressable Led Strip - https://bit.ly/2BJTBmq
2) Arduino Nano - https://bit.ly/2V5zs1q
3) Sound Sensor - https://bit.ly/2EiqbNM
4) Male And Female Jumper - https://bit.ly/2GwU2V6

[Flyrobo.in]
Arduino Nano : https://www.flyrobo.in/arduino...._nano_r3_board_with_

Sound Sensor : https://www.flyrobo.in/sound_s....ensor_detection_modu

Male And Female Jumper : https://www.flyrobo.in/combo-o....f-3-type-jumper-cabl
-----------------------------------------
➤Here's the code link : http://www.mediafire.com/folde....r/5d6ydui90fvw/Ardui
If you have code related any problem you can contact me here (surajitmajumdar360@gmail.com)

Thanks For Watching
✅LIKE ✅SHARE ✅ COMMENTS✅ SUBSCRIBE
----------------------------------------------------
🎧 Background Music
Leaf by KV https://www.soundcloud.com/kvmusicprod/
Creative Commons — Attribution 4.0 International — CC BY 4.0
www.creativecommons.org/licenses/by/4.0/
Music promoted by Audio Library https://youtu.be/GlM3s880xfY

Track: Electro-Light - Symbolism [NCS Release]
Music provided by NoCopyrightSounds.
Watch: https://youtu.be/__CRWE-L45k
Free Download / Stream: http://ncs.io/symbolism

-----------------------------------------------------
➤Here my social sites:
Facebook: https://www.facebook.com/surajit.maju...
Instructables: http://www.instructables.com/member/S...
twitter: https://twitter.com/DIYBuilder1
Instagram: https://www.instagram.com/surajit_majumdar/
-------------------------------------------------------------
#MusicReactiveRGBLedStrip #ArduinoMusicReactiveLedStrip #LedVuMeter

How To Make DIY 18650 Battery Charger Using TP4056 Module

Fri, 14 Apr 2023 19:57:31 +0000

$2 for 10 PCB & Free Shipping on First Order: https://jlcpcb.com

Hello guys, in this tutorial I am going to show you how to make DIY 18650 Battery Charger, So let's get started :)

▽Here's the parts list:
1) TP4056 Charging Module -
2) Battery Holder -
3) Self Locking Switch -
4) XT60 Connector -

➤Here's The Gerber File Link : http://www.mediafire.com/file/....v63qqqvln9ro9n2/1865
➤Here's The Circuit Diagram And Schematic : https://easyeda.com/SurajitM/d....iy-18650-li-on-batte

Thanks For Watching
✅LIKE ✅SHARE ✅ COMMENTS✅ SUBSCRIBE
----------------------------------------------------
🎧 Background Music
Morning by LiQWYD https://soundcloud.com/liqwyd
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/lv8LMI0NdaM
-----------------------------------------------------
➤Here my social sites:
Facebook: https://www.facebook.com/surajit.maju...
Instructables: http://www.instructables.com/member/S...
twitter: https://twitter.com/DIYBuilder1
Instagram: https://www.instagram.com/surajit_maj...
-------------------------------------------------------------
#18650BatteryCharger #DIYBatteryCharger #Li-ionBatteryCharger

Meet My New Pet - Petoi Bittle The Bionic Dog Robot (Ep - 05)

Fri, 14 Apr 2023 19:47:34 +0000

In this video, I'm doing the unboxing, assembling and testing of Petoi Bittle.

Petoi Bittle is a small but agile and powerful bionic robot dog. It is an ideal tool for learning, teaching, and researching quadruped robots. With a customized Arduino board coordinating all instinctive and sophisticated movements, you can clip on various sensors to bring in perception. You could also inject artificial intelligence capabilities by mounting a Raspberry Pi or other AI chips.

Product Link: https://www.petoi.com/pages/bi....ttle-open-source-bio

😊Follow Me
Instagram: https://www.instagram.com/diy.builder/
--------------------------------------------
🎬GEAR I USE
Canon EOS 200D II With 18-55mm kit Lens: https://amzn.to/3a5b0r4
Tripod: https://amzn.to/3cYWIdr
Lights: https://amzn.to/3pbqr5k
Editing Software: Adobe Premiere Pro

🎵 Audio by @Epidemic Sound
You can find all the music I use here: https://www.epidemicsound.com/referral/fmubpx/
---------------------------------------------
#RobotDog #BionicRobot #PetoiBittle

Making My First Lego Car With Arduino (Ep 01)

Fri, 14 Apr 2023 19:47:34 +0000

In this video, I'm making my first lego car, and here I'm using the Arduino to modify it into a motorized car so it can be controlled by a smartphone. sounds pretty fun right, so let's get started :)

This video is inspired by GAWX Art 😊

Up to get $18 new user coupons；https://jlcpcb.com/RHS Discount Coupon Code valid foreve【JLC-REBE 】
Product link: https://store.mi.com/in/item/3194100009

Show your love ❤️ https://bit.ly/2WlyA8Y

😊Follow Me
Instagram: https://www.instagram.com/diy.builder/
--------------------------------------------

GEAR I USE
Canon EOS 200D II With 18-55mm kit Lens: https://amzn.to/3a5b0r4
Tripod: https://amzn.to/3cYWIdr
Lights: https://amzn.to/3pbqr5k
Editing Software: Adobe Premiere Pro
--------------------------------------------
🎵 Audio by @Epidemic Sound
You can find all the music I use here: https://www.epidemicsound.com/referral/fmubpx/
---------------------------------------------
#LEGO #LEGOCAR #ArduinoProject

How To Make Arduino Mecanum RC Car using a drone Transmitter (Tutorial)

Fri, 14 Apr 2023 19:47:34 +0000

Hey guys 🖐, In this tutorial, I'm going to show you how to make an Arduino RC car using a drone transmitter. I've used the flysky fs-i6x transmitter and fs-ia6b to control the car. I'm also using the mecanum wheels here which help this car to achieve omnidirectional movement. But you can use the normal rubber tyre if you don't have enough budget for the mecanum wheels. Overall this project is quite easy to follow and I've tried my best to make this tutorial as simple as possible. So let's get started now :)

📌CHAPTERS
0:00 Introduction
1:02 Car-Making Process
3:17 Transmitter Binding Process
4:55 Programming Part
5:48 Final Assembling
6:40 Testing
7:08 Demo

😊Follow Me
Instagram: https://www.instagram.com/diy.builder/
--------------------------------------
💻Code: https://bit.ly/3VHP3UC
🔌Circuit: https://bit.ly/3VVM2Qb
--------------------------------------
🛠Parts Required :
1) Arduino Uno: https://bit.ly/3iAq6vm
2) L293D motor driver Shield: https://bit.ly/2mvO7XL
3) TT Gear Motor: https://bit.ly/3VLAj6v
4) Mecanum Wheel: https://bit.ly/3YmImsy
5) Flysky FS-IA6B receiver: https://bit.ly/3H8W8Jq
6) Flysky FX- i6X Transmitter: https://bit.ly/2HrLyh8
7) 18650 Li-ion Battery: https://bit.ly/3XWbA1a
8) 18650 Battery Holder: https://bit.ly/3VJXeza
9) Jumper Wire: https://bit.ly/3VLaSSO
10) Chassis kit: https://bit.ly/3VHQods

---------------------------------------
🎬GEAR I USE
Canon EOS 200D II With 18-55mm kit Lens: https://amzn.to/3a5b0r4
Tripod: https://amzn.to/3cYWIdr
Lights: https://amzn.to/3pbqr5k
Editing Software: Adobe Premiere Pro

🎵 Audio by @Epidemic Sound
You can find all the music I use here: https://www.epidemicsound.com/referral/fmubpx/
---------------------------------------------
I just wanna say 😊
"Thank you guys for your love and support ❤ keep creating amazing things"

Business inquiries only
surajitmajumdar360@gmail.com
--------------------------------------------------
#ArduinoRCCar #arduinoproject #MecanumRobot

Робот Xiaomi MITU BUILDER DIY не балансирует падает – калибровка гироскопа